RAMPS FOR
RESELLERS
PORTEOS

+33 6 67 50 71 16

9 route du Camp D'Aviation

34130 Candillargues

France

CONTACT US

Click on the map

© 2018 Porteos All Rights Reserved

Follow us for news and special offers

  • Porteos Facebook
  • Porteos on Youtube

LOAD UP TO 450 KG TO A HEIGHT OF 150 CM

UNIQUE LOADING RAMP

The loading height of most Pickups is around 90 cm - a simple foldable loading ramp is not at all suitable to safely load your motorcycle to this height, and even less so to unload it.

Our solution allows you to load your motorcycle of up to 450 kg to a height of up to 110 cm. Our ramp puts very little pressure on the tail gate when charging/unloading - most of the weight stays in the cargo area.

The ramp is attached to the cargo area with 4 bolts - there are several attachment points along the rails of the ramp which allows to find the best position for drilling through the cargo area. We are also developing an install kit which allows for the ramp to be attached to the tie-downs of the cargo area. This will avoid drilling through the cargo area.

 
1/4

DUAL CAB COMPATIBILITY

Both models can be installed in a Pickup, even a double-cab one. The difference between the 2.1 m and the 2.5 m:

 

- With the 2.5 m there will always be a fixed part which will extend past the tailgate. If your Pickup is not double-cab + the open tailgate, this ramp will extend by probably only 10-20 cm.

 

With the 2.1m ramp you will have to attach the 75 cm extension because of the loading height of most Pickups which is approx. 90 cm. There are two advantages and one possible inconvience with this solution: The first advantage is that if you have a shorter cargo area you can detach the extension once the bike is loaded. It takes about 1:30min to detach it since the bolts it uses are the same size as the socket used on the cordless drill necessary to operate the wormdrive. So you can use the cordless drill to also detach the extension.

 

The second advantage is that there will be less of an angle for loading because with the extension the whole ramp is now 2. 85 m. This will put less strain on the cordless drill.

 

The disadvantage is that you will have to attach/detach the extension if you find that the ramp now extends too far beyond the tailgate (35 cm more compared to the 2.5 m ramp).

 

Please inform yourself on the legislation in your particular country regarding how far a load can extend at the back of a vehicle.

TECHNICAL DETAILS

Price incl. VAT

1990 €

2120 €

* With the 75 cm extension which is attached to the UN 1000 ramp, the max loading height increases to 110 cm.

** With the 75 cm extension which is attached to the UN 2000 ramp, the max loading height increases to 150 cm.