LOADING HEIGHT UP TO 150 CM
Our ramps can be installed also in medium sized vans with a cargo bay length of around 240 - 250 cm. Our 2.1 m ramp can be used with the 25 cm extension which allows for the motorcycle to slide a bit further into the van in order to be able to close the doors of the van (without this extension, the rear fender of the motorcycle can extend beyond the doors).
The 2.1 m ramp automatically adapts to different loading heights - up to 70 cm.
It is easily installed with only 4 bolts. We also supply with the ramp two zinc coated steel plates with pre-drilled holes. This can be used on the underside of the cargo bays to reinforce the cargo bay metal sheet where the bolts are installed. This is necessary because in many cases the metal sheet in vans is thin and can start to bend after a few loading/unloading cycles.
LOAD YOUR MOTORCYCLE EVEN ON A UTILITY VEHICLE
With the 2.1 m ramp plus the 75 cm extension, the loading height extends up to 110 cm. This allows you to load your motorcycle on a utility vehicle, even in a side loading position. Once the motorcycle is loaded you can detach the extension - this takes about 1-2 minutes because you can use the same cordless drill and its socket to unscrew the 4 bolts holding the extension in place.
Price incl. VAT
* With the 75 cm extension which is attached to the UN 1000 ramp, the max loading height increases to 110 cm.
** With the 75 cm extension which is attached to the UN 2000 ramp, the max loading height increases to 150 cm.